Raindrop - Pocket Lab with 12 instruments and MORE


Screenshot 2023-05-17 at 21.45.27.png



"Raindrop" is a pocket-type extremely portable virtual instrument hardware platform that integrates more than 12 commonly used experimental instruments. After installing “Instruments Playground” software on the computer and connnecting “Raindrop” to the computer via USB cable, the combination enables learner embrace a basic engineering test and measurement laboratory. Learners can complete hands-on experiments while learning engineering MOOC courses (from Circuits to Signal System, from Sensors to Control, etc.) to correlate between theory and practice , to improve learning outcomes. Detailed usage information can be accessed:  http://yushiyan.net/raindrop

 

The instruments integrated in "Raindrop" are as follows:

- 2-channel oscilloscope

- Dual channel signal source

- Dual channel programmable power supply

- Spectrum Analyzer

- Network Analyzer

- Voltmeter

- Data Logger

- Logic Analyzer

- Protocol Analyzer

- Pattern Generator

- Digital I/O

- User-defined Instruments-on-Chip(IoC)


Specifications:

Dual-channel USB digital oscilloscope (1MΩ, ±25V, support differential input, 20M/40M/100MSPS dual-channel oscilloscope options)

Dual-channel arbitrary function generator (±5V, 20M/40M/100MSPS dual-channel signal source options)

16-channel digital logic analyzer (3.3V CMOS, 20M/40M/100MSPS 16 channels options)

16-channel pattern generator (3.3V CMOS, 20M/40M/100MSPS 16 channels options)

16-channel virtual digital I/O, suitable for digital logic course applications

2 digital input/output trigger signals (3.3V CMOS) for connecting multiple instruments

Single channel voltmeter (AC, DC, ±25V)

Network Analyzer: Bode, Nyquist, Nichols transfer diagram for 1 circuit. Range: 1Hz to 2MHz/12MHz options

Spectrum Analyzer: Power Spectrum and Spectrum Measurements (Noise Floor, Spurious Free Dynamic Range, Signal-to-Noise Ratio, Total Harmonic Distortion, etc.)

Digital Bus Analyzer (SPI, I²C, UART, Parallel Digital I/O)

2 programmable power supplies (0~+5V, 0~-5V). The maximum output current and power depends on the choice of YuZhu | Raindrop® power supply:

250mW maximum per supply or 500mW total when powered via USB

800mA maximum current per power supply or 2.1W maximum power supply when powered by an external wall power supply


Products include:


Raindrop YuZhu | Raindrop®

1 regular size project box

1 x USB A to USB Type-C Programmable Cable

1 set of 2×15 Flywire signal line components

5 6-pin male headers in 1 pack


For more information, please contact: 

sales@yuzhou.ai